ope体育

Automated motion control industry
R & D, design, production
National unified service hotline: 186-6510-4269
PRODUCTS
Product Categories
4Products
BLD008A无刷电机驱动器
BLD008A brushless motor driver
Product introduction:
BLD008A brushless motor driver is a high performance brushless driver product developed for medium and low voltage DC brushless motors. 功率的三相直流无刷电机调速。 DC brushless motor driver is suitable for speed regulation of three-phase brushless DC motors with 12-30VDC and 120W power. 压调速、上位机(可编程控制器PLC、单片机等)、脉宽调速和具有过压、欠压、过流和霍尔非法保护等功能。 BLD008A has a variety of speed adjustment modes to choose from, which can provide internal potentiometer speed adjustment, external potentiometer speed adjustment, external analog voltage speed adjustment, host computer (programmable controller PLC, microcontroller, etc.), pulse width speed adjustment With over-voltage, under-voltage, over-current and Hall illegal protection functions.

BLD008A brushless motor driver

Details


  • Features
  • Specifications
  • Installation size
  • Drive connection
  • Set to run
  • Speed regulation method


产品特点 Product Features



加/减速时间设定 各种报警指示 Acceleration / deceleration time setting Various alarm instructions

最大电流输出设定 内置电位器RV调速控制 Maximum current output setting Built-in potentiometer RV speed control

电机堵转力矩保持 外接电位器调速控制 Motor stall torque holding External potentiometer speed control

外部模拟量信号调速 PWM调速控制 External analog signal speed control PWM speed control

规格参数 Specifications




parameter Minimum value Rating Max
Input voltage (VDC) 12 twenty four 30
(A) Output current (A) One One
8
(V) Hall signal voltage (V) One
One
5
(mA) Hall drive current (mA) One
20 One
(Ω) External potentiometer (Ω) One
10K One
(VDC) Input analog voltage (VDC) One
One
5
(RPM) Speed control range (RPM) One
One
20000

安装尺寸 Installation size
驱动器连接 Drive connection




Terminal number Signal type Signal description
BRK control signal Motor fast brake signal port, BRK port and COM port disconnect the motor for normal operation, short-circuit closed for quick brake
EN Stop signal control terminal, the EN port and COM port are disconnected for the motor to stop slowly, and the short circuit is closed for normal operation.
F / R Motor rotation direction control port, when F / R port and COM port are disconnected, the motor rotates clockwise, and short circuit closes counterclockwise
COM Common port (0V reference level)
SV Speed control signal input port, the middle lead-out terminal is connected here when external potentiometer speed control, both sides are connected to REF + and COM port
REF + Hall signal DC Brushless Motor Hall Signal Power Cord
HU HU Brushless DC Hall Signal HU
HV HV Brushless DC Hall Signal HV
HW HW Brushless DC Hall Signal HW
REF- 接地线 Hall signal ground wire of DC brushless motor
W Motor connection Brushless DC motor W phase
V Brushless DC motor V phase
U Brushless DC motor U-phase
DC + Power connection DC power is connected to the positive electrode (voltage range: 12 ~ 30VDC)
DC- DC power connected to negative pole


设定运行 Set operation



最大电流输出设定 Maximum current output setting

  The output setting of the maximum current is to protect the brushless DC motor from damage during overload operation.

The drive over-current alarm and stop the drive operation to achieve this purpose, the set current value should be equal to the rated current of the brushless motor

Match the values without paying attention to the actual power supply voltage setting range: 1.6 ~ 8A.



加/减时间设定 Add / subtract time setting

  The potentiometer can set the acceleration and deceleration time of the brushless motor. The acceleration time is from the stop to the rated speed of the brushless motor.

The required time, the deceleration time is the time from the rated speed to the stop of the brushless motor. Adjustable by rotating left and right

Addition and subtraction time setting range: 0.3 ~ 15S.


调速方法 Speed regulation method


QR code
Customer Service Center: 186-6510-4269
点击咨询我们 Company website: 124bpms.com
Copyright 2017【 粤ICP备17105796号-1 】访问量: Dongguan Bangtuo Transportation Control Intelligent Technology Co., Ltd. All rights reserved © Copyright 2017 [ 粤 粤 ICP 备 17105796 号 -1 ] Visits: [ Bmap ] [ Gmap ] [ Background Management ] Technical Support: Dongguan Website Construction
Hot Keywords: Brushless DC Motor-Low Voltage DC Servo-DC Brushless Motor Driver-Stepper Motor Driver-DC Brushless Geared Motor