体积小巧，便于安装 ◆外接定位器调速控制 ◆ Small size and easy to install ◆ Speed control of external positioner
PWM调速控制 ◆外部模拟信号调速 ◆ PWM speed control ◆ External analog signal speed control
内置定位器调速控制◆拥有过温、过流等报警保护功能 ◆ Built-in positioner speed control ◆ With alarm protection functions such as over temperature and over current
|Input voltage (VDC)||12||twenty four||30|
|（A） Output current (A)||One|| One ||3|
|（VDC） Overvoltage protection (VDC)||One|| One ||30|
|（VDC） Under voltage protection (VDC)||12|| One || One |
|（Ω） External potentiometer (Ω)||One||10K||One|
|（VDC） Input analog voltage (VDC)||One|| One ||5|
|（RPM） Speed control range (RPM)|| One || One ||20000|
|Terminal number||Signal type||Signal description|
|F / R||control signal||Brushless motor rotation direction control port, F / R port and DC- port disconnect the motor for clockwise rotation, short circuit for counterclockwise rotation|
|BRK||Brushless motor fast brake signal port, disconnection of BRK port and DC-port motor for fast brake, short-circuit close for normal operation|
|SV||Speed control signal input port, when the external potentiometer adjusts the speed, the middle terminal is connected here, and the two sides are connected to VCC and DC- ports respectively.|
|VCC||External potentiometer power port (the positive pole of Hall power is shared by this port)|
|HU||Hall signal||Brushless DC Hall Signal HU|
|HV|| Brushless DC Hall Signal HV |
Brushless DC Hall Signal HW |
|U|| Motor connection ||Brushless DC motor U-phase|
|V|| Brushless DC motor V phase |
|W|| Brushless DC motor W phase |
|DC-|| Power connection ||DC power is connected to the negative pole (the negative pole of Hall power is shared on this port)|
|DC +||DC power is connected to the positive electrode (voltage range: 12 ～ 30VDC)|
刹车设定 ◆ Brake setting
When the brake function is set at the factory, the BRK terminal and the DC- terminal are connected. When the motor is running, the operation and stop of the motor can be controlled by connecting or disconnecting the BRK terminal and the DC- terminal.
When BRK terminal and DC- terminal are connected, the motor runs; otherwise the motor stops running.
正反转设定 ◆ Forward and reverse setting
The factory setting of the forward / reverse switching function is F / R and DC- disconnection. When the power is turned on, the driver can drive the motor to run clockwise by adjusting the potentiometer.
Connect the switch or PLC with DC- to control its on-off, and then realize the motor's forward and reverse running switching.
When disconnecting the F / R and DC-end cables, the motor runs clockwise.
When connecting the F / R and DC-end cables, the motor runs counterclockwise.